Skip to main content

ERacer Aircraft Construction Website

Our Goal: To safely build and fly the ERacer
ERacer Aircraft Homepage
ERacer Specs
Current Flying
ERacer Upgrades
ER CONSTRUCTION LOG
ERacer Landing Gear Kit
Eureka Wing Cores
ERacer Merchandise
Canard Covers by Doroth
ER Builders/Flyers List
Shirl Dickey's ERacer
Tom Koftinoff's ERacer
Erik Frank's ERacer
Cliff Cady's ERacer
Bruce Vinnola's ERacer
Rob Orsolits' ERacer
Tore Bjoelgerud's ERacer
Mitch Hargin's ERacer
Mark Fisher's ERacer
Andre Rousseau's ERacer
Tommie Turner's ERacer
Kim Riley's ERacer
Daniel Muller's ERacer
David Hanson's Canard X
Joel Aubry's ERacer
Jack Morrisons ERacer
Canard Aircraft Pictures
ERacer Newsletters
Comment or Contact Us
Site Map
ERacer projects for sale
ERacer Main Landing Gear Kit
 
ERacer Aircraft and Shirl Dickey, Designer of the ERacer, are now ,once again, beginning the production of ERacer landing Gear.  The gear legs, Pivot bearings, and retract linkage can now be purchased.  Below are the details of the current available kit. 
 
 
ERacer Chapter 10 "Landing gear Installation" is required and must be followed to correctly install this Kit! there are extra lay-ups that must be added to the gear legs!
 
 
 
The ERacer Main Landing Gear kit components:         
- 2 main Carbon Fiber Landing Gear Legs
- 2 sets of main gear linkage:
                    2 A links (with bolts)
                    2 H Links (only lower bolt included)
                    2 T Links (with attach bolts)
- 2 sets of main pivot bearing mounts and bushings
- 2 main pivot bolts 
 
Price for entire kit:  $5000 
 
   ***    Price increase is due to gear linkage manufacture costs  *** 
 
(****This price does NOT include Shipping**** )
 
 
 
 
 (Old pivot bearings in this pic no longer available)
 
 
The ERacer Landing Gear Kit is now also sold separately as follows:
 
 
Linkage:
One A link, H link , and T link  :       $950
 
Two of each  (set)                    :      $1,800
 
 
 
 
 
 
 
 
 
 
 
 
 
 
New Pivot bearings:
2 ERacer Gear Pivots, bearings and 1 gear axle bolt   :           $700
 
4 Pivots, bearings and 2 bolts  (set)                                         $1100
 
 
 
 
 
 
 
 
Gear Legs
1 ER carbon fiber gear leg               :     $1200
 
2 carbon fiber gear legs (set)           :     $2000
 
 
 
ERacer/Berkut (Machined Aluminum) Landing Gear Leg Talons are available to buy.
(These Talons are optional and not part of the ERacer landing gear kit)
 
 
            I do not have these is stock but can have them made for you upon order.  Cost will be $750 per pair.
 
 
 
NOSE GEAR
Nose gear strut can be purchased from Featherlite Inc.
 
For ease of entering the cockpit, ERacer Aircraft recommends an electric nose lift for the nose gear retraction though the plans still include the 3 hydraulically actuated landing gear.
 
Electric nose lift system must be purchased outside this website
 
 
ERacer Aircraft can support the original plans if needed.